Roth Technologies, LLCIndustrial seals for moving wire processes
Vertical wire coating

Vertical wire coating wiper seal: what the MWS does

“Wiper seal” can describe different functions on a wire line. A Moving Wire Seal is intended to seal the moving-wire path at a bath or treatment-tube boundary; it is not a downstream coating wiper or a device for metering film thickness.

For sealing the bath entry

For sealing the bath entry

When the need is to let a vertical wire enter a non-pressurized liquid bath while limiting leakage around the entry, an MWS may be a suitable design starting point. The seal is mounted in a holder, and the end user makes the tip opening to suit the wire and setup.

For removing or metering coating

For removing or metering coating

If “wiper” means scraping excess liquid from the wire, sizing the coating, or controlling final film thickness, the MWS is not designed to perform that function. A separate, application-specific wiping or metering method would be needed.

Check the full operating conditions

Check the full operating conditions

Before selection, review wire diameter and speed, number of wires, spacing, holder dimensions, liquid chemistry, temperature, and whether the process is pressurized. Confirm material compatibility and validate operation on the intended line.

Application note: MWS seals the wire path into the process. It does not wipe or meter the coating.