Choose the seal geometry for your wire layout.
MWS means Moving Wire Seal. The Standard and JRS series address different wire spacing needs. The MWS-004 EPDM product is available through the online listing; contact sales about other configurations.
MWS-004 EPDM
The standard series is designed around the common 1.0-inch center spacing layout. MWS-004 is offered in black EPDM, 35A durometer, in a 100-unit bulk lot.
- Supplied without a tip opening.
- For installation in a non-pressurized process bath or applicator.
- Direct order pricing: $1.50 per unit; 100-unit order quantity.
Closer centers for compact wire layouts.
The JRS series was introduced for PTFE application on smaller-diameter wires with 0.5-inch centers, compared with the standard 1.0-inch center spacing.
- Designed for tighter applicator layouts.
- Drawing dimensions are shown in millimeters.
- Contact Roth Technologies to discuss material, configuration and current availability.
Starting points for integration.
Use the existing drawing and application details as design guidance; qualify the seal and holder in the intended process.
| Item | Reference guidance |
|---|---|
| Applicator material | Stainless steel |
| Standard opening in holder | 7/8 in (22 mm) |
| Holder wall | 14 AWG stainless steel (0.0747 in / 1.89 mm) |
| Process | Non-pressurized bath; final fit must be confirmed by the process designer |
| Tip opening | Not supplied open; the end user creates an opening for the wire and application |
These are starting-point dimensions from the existing Standard page, not a substitute for reviewing the full product drawing and validating the installation.