Interactive modelVertical oven wire temperature model
Explore estimated copper-wire temperature through a multi-zone vertical oven. The model assumes zero forced airflow and accounts for natural convection and radiation.
Model scope and use: This is a one-dimensional axial estimate for steady-running process conditions; it calculates a wire segment’s temperature as it moves through the vertical oven. The supported wire range is 12–30 AWG. The model assumes a lumped copper wire, quiescent surrounding air with zero external forced airflow, and uniform zone air and effective radiating-wall temperatures equal to each entered setpoint. It calculates natural convection and radiation separately, with an effective full radiative view (F = 1). Copper density and specific heat are held constant, and each zone’s convection boundary layer is evaluated independently. It does not include airflow induced by wire motion, wet-coating thermal mass or evaporation, curing reactions, wire tension, or measured oven circulation. Use it for preliminary comparisons of wire gauge, line speed, zone setpoints, and surface emissivity; do not treat the output as a production recipe, cure prediction, or validated temperature. Confirm against the actual oven and wire using measurements.
USEPreliminary process comparison
Explore how changing wire gauge, line speed, zone lengths and setpoints, or surface emissivity affects estimated copper conductor temperature.
CAUTIONValidate the real line
Use caution when airflow, wire-motion effects, wet coating, solvent flash-off, coating mass, or curing behavior materially affects heat transfer. The model does not calculate those effects; verify temperatures and coating performance on the actual process.
The displayed run count increments when a visitor selects Run Model. It records the cumulative number of deliberate model runs on this website.