Roth Technologies, LLCIndustrial seals for moving wire processes
Chemical treatment tube

FluoroEtch tube seal for a continuous wire path

A sealed treatment tube can use one Moving Wire Seal at the wire inlet and another at the outlet, allowing PTFE-coated wire to move continuously through a defined FluoroEtch® treatment zone.

MWS placement at both tube ends

MWS placement at both tube ends

The MWS units form the moving-wire entry and exit interfaces. The tube, wire path, seals, ventilation, containment, rinse, and handling equipment must be designed together for the intended process. The seals do not perform the chemical treatment.

Chemical compatibility must be specific

Chemical compatibility must be specific

FluoroEtch® is aggressive toward many standard elastomers and seals. Do not assume that a material is compatible based only on its generic polymer name. Review the MWS-004 EPDM technical brief and confirm that the tested compound and conditions cover the actual chemistry, temperature, exposure time, and operating practice.

Validate the process and containment

Validate the process and containment

Follow the current chemical supplier documentation and site safety procedures. Evaluate seal condition, leakage, wire movement, and the complete tube arrangement under the intended conditions before production use. Contact Roth Technologies with the process details when discussing configuration.

Starting tip-opening fit: Use the wire outside diameter at the seal, including any coating already on it, as a nominal 1:1 starting size. The MWS application guidance calls for light wipe contact, not a loose clearance or a pinching fit. No universal oversize percentage is specified; confirm by trial with the actual wire and line conditions.
Application note: The MWS arrangement does not by itself establish chemical compatibility. Review the technical brief and qualify the actual application.